Project M 3.02 Released! (Changelog in post)

[standardtoaster]

All zips have the most up to date launcher.

 

[shapular]

I tried to use the updater but for some reason it changed my wifi set into the full set. What do I do?

 

[standardtoaster]

The launcher installs the full set only. However, the wifi files are already on the card and you just have to switch them out. At some point in the future the launcher will support switching codesets.

 

[shapular]

Which files are different between the wifi set and the full set?

 

[9bit]

Which files are different between the wifi set and the full set?

Just the ones in the "Full" and "Wifi" folders. Those are the ones you'd need to copy over the existing files.

 

[GunBlaze]

Question: Will the launcher work for non-Project M modsets? I ask because it would be incredibly convenient to not have to worry about the 2GB limit for Brawl Minus or any of my fully custom builds.

Bero released the code somewhere on KC-MM. I can't find it now, though.

 

[Convour]

Bero released the code somewhere on KC-MM. I can't find it now, though.

SDHC Extension[Bero]
* C23CB3D8 00000004
* 546302D7 41820014
* 38600001 3C808058
* 60840300 90640000
* 2C1D0000 00000000
* C23EEE18 00000007
* 80610014 54630253
* 41820028 38000009
* 8061000C 5463C43E
* 38630001 1CC30400
* 3C60803E 6063EE58
* 7C6903A6 4E800420
* 80A1000C 00000000
* C23CB620 00000007
* 3D608058 616B0300
* 816B0000 2C0B0000
* 4182001C 39600001
* 91610008 3D60803C
* 616BB410 7D6903A6
* 4E800420 9421FFC0
* 60000000 00000000
* C23CB4AC 00000003
* 38C00000 2C160000
* 41820008 38C00001
* 60000000 00000000
* C23CB5D4 00000009
* 807C001C 2C030001
* 806DCE1C 41820034
* 80030000 90190000
* 80030004 90190004
* 80030008 90190008
* 8003000C 9019000C
* 3C60803C 6063B5E0
* 7C6903A6 4E800420
* 60000000 00000000
* 043EEA20 48191905
* 043EEC1C 48191709
* 06580324 00000028
* 3F008058 63180300
* 83180000 2C180000
* 4182000C 7CB92B78
* 48000008 7F2531D6
* 548006FF 4E800020
* 043EEB6C 481917E1
* 043EED68 481915E5
* 0658034C 00000028
* 3C608058 60630300
* 80630000 2C030000
* 4182000C 3B390001
* 48000008 7F39BA14
* 4E800020 00000000
* 043CBA24 481B48E1
* 043CBD60 481B45A5
* 06580304 00000020
* 3EC08058 62D60300
* 82D60000 2C160000
* 41820008 7C802378
* 7C040040 4E800020

This code allows you to use SDHC cards with FPC 3.5.1.
Gecko speed+Riivolution SDHC support=SDHC extension

Requirement:
*SD or SDHC cards(SDXC cards don't work)
*System menu above 4.1(if you have IOS58 installed, it's OK)
*Project M Launcher

Usage:
1. Make GCT with FPC3.5.1 and this code
2. Run Project M Launcher
3. Enjoy!

Note:
When you eject your SD card during playing game, some problems may occur.
(for example, I'm aware that the game doesn't detect reinsert of a SD card)

 

[The_NZA]

So, I have a really scratched brawl disk. The nice thing about gecko was, when I hit "read disk" and it said "could not read disk", I could just hit cancel and read disk again.

With the new launcher, everytime I hit read disk, it kicks me to the main menu. This means I have to open the app and launch the browser and launch the game aroudn 8-10 times before the scratched disc gods smile and let me enter. Anyway for me to go back to the gecko method?

 

[GunBlaze]

Spoiler: THE BASED CODE

SDHC Extension[Bero]
* C23CB3D8 00000004
* 546302D7 41820014
* 38600001 3C808058
* 60840300 90640000
* 2C1D0000 00000000
* C23EEE18 00000007
* 80610014 54630253
* 41820028 38000009
* 8061000C 5463C43E
* 38630001 1CC30400
* 3C60803E 6063EE58
* 7C6903A6 4E800420
* 80A1000C 00000000
* C23CB620 00000007
* 3D608058 616B0300
* 816B0000 2C0B0000
* 4182001C 39600001
* 91610008 3D60803C
* 616BB410 7D6903A6
* 4E800420 9421FFC0
* 60000000 00000000
* C23CB4AC 00000003
* 38C00000 2C160000
* 41820008 38C00001
* 60000000 00000000
* C23CB5D4 00000009
* 807C001C 2C030001
* 806DCE1C 41820034
* 80030000 90190000
* 80030004 90190004
* 80030008 90190008
* 8003000C 9019000C
* 3C60803C 6063B5E0
* 7C6903A6 4E800420
* 60000000 00000000
* 043EEA20 48191905
* 043EEC1C 48191709
* 06580324 00000028
* 3F008058 63180300
* 83180000 2C180000
* 4182000C 7CB92B78
* 48000008 7F2531D6
* 548006FF 4E800020
* 043EEB6C 481917E1
* 043EED68 481915E5
* 0658034C 00000028
* 3C608058 60630300
* 80630000 2C030000
* 4182000C 3B390001
* 48000008 7F39BA14
* 4E800020 00000000
* 043CBA24 481B48E1
* 043CBD60 481B45A5
* 06580304 00000020
* 3EC08058 62D60300
* 82D60000 2C160000
* 41820008 7C802378
* 7C040040 4E800020

So, I have a really scratched brawl disk. The nice thing about gecko was, when I hit "read disk" and it said "could not read disk", I could just hit cancel and read disk again.

With the new launcher, everytime I hit read disk, it kicks me to the main menu. This means I have to open the app and launch the browser and launch the game aroudn 8-10 times before the scratched disc gods smile and let me enter. Anyway for me to go back to the gecko method?

THANK YOU BASED CONVOUR

So, I have a really scratched brawl disk. The nice thing about gecko was, when I hit "read disk" and it said "could not read disk", I could just hit cancel and read disk again.

With the new launcher, everytime I hit read disk, it kicks me to the main menu. This means I have to open the app and launch the browser and launch the game aroudn 8-10 times before the scratched disc gods smile and let me enter. Anyway for me to go back to the gecko method?

If on a homebrewed Wii, just get Gecko. If not, get Gecko, extract the boot.elf and replace the one at the root of the SD Card with this one. KEEP A BACKUP OF THE LAUNCHER.

 

[sonicrules1234]

All zips have the most up to date launcher.

Unless something has changed since yesterday. The launcher zips have launcher version 1.02, and the other zips have version 1.03. The current version of the launcher is 1.04.

 

[shapular]

Just the ones in the "Full" and "Wifi" folders. Those are the ones you'd need to copy over the existing files.

Ah, I see. I'm not used to this new folder system so I didn't even know those folders existed. I got it figured out now. Thank you.

 

[RE-DAZ]

When you eject the SD and you put it in again it will work normally

 

[drsusredfish]

Does the launcher work with USB loading P:M?

Does the launcher give you a notice of what specific files are being changed and give you the option to not change a file? (brawl+ launcher did this so you wouldn't have to reinstall textures and music)

 

[MonkUnit]

AFAIK the launcher requires the disc, so USB loading is not supported

 

[Xandorm]

I am trying to use the hackless fullset. Not using homebrew. 2GB micro SD in an adapter. This worked for 2.6 and 3.0
My problems are
-" Cleaning up environment... Eventhook release failed c
ode 0"
-Doesn't play. Just black screen (is this supposed to take a while to load?)
-In about:
Launcher Version v1.03 (and 1.02)
both say Project M version and Codeset are unknown instead of 3.01 and full
-I've tried replacing the boot.elf from the hackless launcher (in both full and wifi-safe)
-trying to update says "info.xml was not found."
-Says "Downloading news..." at the top when it's Launcher Version 1.02. It's "Connecting to WiFi.." when it's v1.03. does this take a while too?
We've been having these problems for the past 2 days. But just got "connecting to wifi" today.
We've tried
-placing the launcher files in the SD card with 3.0 inside it
-using wifi-safe. same problems.
-deleting, redownloading, replacing files
-turning the wii off and back on
and everything is in according with the troubleshoot image (2gb card, lock switch off, FAT32, etc.)
except the NTSC-U thing. idk what that is. We're running off a disc copy of brawl
and i'm pretty sure both it and the wii are north american.

 

[GunBlaze]

I am trying to use the hackless fullset. Not using homebrew. 2GB micro SD in an adapter. This worked for 2.6 and 3.0
My problems are
-" Cleaning up environment... Eventhook release failed c
ode 0"
-Doesn't play. Just black screen (is this supposed to take a while to load?)
-In about:
Launcher Version v1.03 (and 1.02)
both say Project M version and Codeset are unknown instead of 3.01 and full
-I've tried replacing the boot.elf from the hackless launcher (in both full and wifi-safe)
-trying to update says "info.xml was not found."
-Says "Downloading news..." at the top when it's Launcher Version 1.02. It's "Connecting to WiFi.." when it's v1.03. does this take a while too?
We've been having these problems for the past 2 days. But just got "connecting to wifi" today.
We've tried
-placing the launcher files in the SD card with 3.0 inside it
-using wifi-safe. same problems.
-deleting, redownloading, replacing files
-turning the wii off and back on
and everything is in according with the troubleshoot image (2gb card, lock switch off, FAT32, etc.)
except the NTSC-U thing. idk what that is. We're running off a disc copy of brawl
and i'm pretty sure both it and the wii are north american.

Did you use Launcher 1.04 after all of this?

 

[Xandorm]

Did you use Launcher 1.04 after all of this?

where do i get launcher 1.04? The launcher I got was off the PM site downloads

 

[GunBlaze]

where do i get launcher 1.04? The launcher I got was off the PM site downloads

You downloaded it just now?

 

[Xandorm]

You downloaded it just now?

no. unless the project m site offers launcher 1.04. I'll try again.

edit: got hackless launcher off the site. About says "Launcher Version: 1.02"

 

[ViewtifulHoe242]

the hell? when i try to play pm off the launcher it sends me to the wii main menu, but when i load it from cfg loader it works fine... oh well now my ganoncides are most entertaining.
PLEASE GIVE US A BETTER RESULTS SCREEN PMBR
maybe something purple with a wicked design.

 

[Jade_Rock55]

It also sends me to the wii menu...

 

[ShortFuse]

1.01 fixes a lock up for Wiis with GC memory cards plugged and some hackless boot ups
1.02 fixes compatibility with some SD cards / Wiis
1.03 fixes Wi-Fi connections
1.04 fixes a crash when updating the launcher over Wi-Fi

If you're getting sent to the Wii Menu and the ProjectM version is unknown, it's because you probably don't have PM installed or you need 1.02+ for the Launcher to read your SD card.

 

[Xandorm]

I'm not getting sent to the wii menu. I can't do anything at the P:M menu except play (black screen) update (connecting wifi/download failed retrying) about (unknown) and exit (black screen)

PM is on the card

 

[Pluto.19]

After the Project M Launcher screen comes up and I select play, it starts me over at the brawl intro video intro. Can anyone help me out? I'm running the latest update they have too.
Launcher Version: v1.04
Project M Version: 3.02
Project M Codeset: Full

 

[Argentic]

I have a problem with the update 3.01, when the download reaches 18.411 kb, it doesn't work anymore.

 

[Banjodorf]

Is there a way to install the launcher, and preserve all my modifications such as stages/music/etc. without needing to redownload them? Or do alot of finagling with the files?

 

[Mike Stallings]

I must be doing something wrong with the launcher here... I'm hitting update after reinserting an unmodified version of 3.0 straight from the rar, and it's telling me "the Project M Info.xml was not found"

what exactly am I missing?

I'm in the same boat.

 

[Xandorm]

I'm in the same boat.

same here

 

[Phoenix502]

I actually just decided to make a copy of my modified files, place them somewhere in my computer, delete and reinstall the PM build, then put them back. I'm good to go now..

 

[kesterstudios]

u spelled installation wrong...

 

[Generically Epic]

Is there a way to install the launcher, and preserve all my modifications such as stages/music/etc. without needing to redownload them? Or do alot of finagling with the files?

I agree. I have an awesome build that I don't want to have to go in and replace every-time there's a small update. I have my own team textures, stages, and music.
Is there a way we don't have to deal with this... ? Unfortunately, I'm in a dorm and nintendo doesn't allow that... ><; So I have to manually update my P:M

 

[Renji64]

Does the Rematch input work on wifi?

 

[Mattchu]

I'm in the same boat.

go redownload 3.02 on projectmgame site

 

[DiamondDust]

For the life of me, I can't get this to work with CFG USB Loader when I have gotten it to work in the past. Do I have to rename the 'projectm' folder back to 'private' or something? The CSS is clearly hacked, but none of the other codes seem to work.

 

[Obskore]

For the life of me, I can't get this to work with CFG USB Loader when I have gotten it to work in the past. Do I have to rename the 'projectm' folder back to 'private' or something? The CSS is clearly hacked, but none of the other codes seem to work.

be sure to

1: have the codes file in sd:/usb-loader/codes
2: unlock the sd card
3: use ocarina ON and hooktype VBI (AXNextFrame if you're PAL)
4: use an NTSC copy of the game
5: the sd card is FAT32

and have the homebrew version installed in the sd card

 

[DiamondDust]

be sure to

1: have the codes file in sd:/usb-loader/codes
2: unlock the sd card
3: use ocarina ON and hooktype VBI (AXNextFrame if you're PAL)
4: use an NTSC copy of the game
5: the sd card is FAT32

and have the homebrew version installed in the sd card

Definitely done all that, but the game just loads up normally with a hacked CSS. Normal Strap menu, normal opening, etc. I'm on an NTSC Wii with my NTSC copy of Brawl on my HDD. Definitely using the Homebrew version as well. I extracted everything as was in the .zip, so I dunno if that might be the problem since I'm using a backup to try to play.

By the way, I absolutely love your avatar.

EDIT: Do I need anything else in the 'codes' folder in the 'usb-loader' folder other than the .gct file? That could be the problem...

 

[Obskore]

By the way, I absolutely love your avatar.

EDIT: Do I need anything else in the 'codes' folder in the 'usb-loader' folder other than the .gct file? That could be the problem...

thanks :3

and no, that's fine, you could provide with a screencap of the root of your sd card
or i'd suggest to redownload the homebrew full/wifi (whichever you want) and copy it again to your sd card

the hard way would be re-format and start from scratch, or either defragment the sd card

i play PM via usb loading as well, so i know what i'm talking about, also, be sure to update your usb loader

 

[DiamondDust]

thanks :3

and no, that's fine, you could provide with a screencap of the root of your sd card
or i'd suggest to redownload the homebrew full/wifi (whichever you want) and copy it again to your sd card

the hard way would be re-format and start from scratch, or either defragment the sd card

i play PM via usb loading as well, so i know what i'm talking about, also, be sure to update your usb loader

A screenshot? Sure.

Spoiler

I actually tried reformating my SD to not avail. I could try redownloading everything, but let's just make sure I didn't screw something up on the SD card before wasting some bandwidth....

 

[9bit]

Also put a "codes" folder in the root of your SD card with the GCT file inside. Just to be safe.

 

[Obskore]

that actually looks good, just in case, make another codes folder in the root and copy the gct there

[EDIT:] ninja'd D: