• Welcome to Smashboards, the world's largest Super Smash Brothers community! Over 250,000 Smash Bros. fans from around the world have come to discuss these great games in over 19 million posts!

    You are currently viewing our boards as a visitor. Click here to sign up right now and start on your path in the Smash community!

The Smash 3C Project - PM alts, recolors, and more!

Cahalan

Cahalan

Smash Ace
Joined
Aug 23, 2014
Messages
925
It's finally here:
https://www.mediafire.com/?bwgvexq1jpbzxw4

All these wonderful people now have Rim Light!


Proper Credits are within the folders of said character.

Also funny a thing about Ridley: the current model in the mod already uses rim light because @BaganSmashBros loved how the model looked with it and replaced the old ref texture with the Smash 3 Edge Texture. However I was able to keep both and when the fixed model released, it only had the edge texture; my efforts then went into re-adding the old ref texture to give it a more polished look. :p

Ridley also has some special edge textures in two of his extra costumes, so be on the look out for those! :)

(Knuckle Joe Needs Recolors so get creative!)

Edit: Pichu may be the most difficult one because of how the rimlight looks in game, we may need to make an original model to make the effect work better.

P.S. @Shin F. after you finish making move sets for your two Mother Characters, how about helping Mallow and Snowy be more than an Ice Climbers skin?
Neutral B: Drain/Mega Drain (Despite your Pokemon knowledge, in Mario RPG's case it's a fire based attack and it's chargeable; getting stronger the longer the charge. GFX go from a "fire ball" to a laser of intense fire for reference)
Side B: Thunderbolt/Shocker (Chargeable, however the functionality goes from an AoE electric move to Pikachu's Thunder; get stronger but changes focus to a single enemy)
Down B: Blizzard (Same as IC, but stronger/lower freeze chance. Included because of Snowy)
Up B: Ultra Jump (Does no damage going up, but when you press b again you ground pound straight to the ground. It's advised that before pressing b again that you make sure you're close to the platform or in a recovery situation, use your other attacks to get back to the main arena)
Smash Attacks could make use of Mallow's other Weapons
Final Smash could be Ness/Lucas's
 
Last edited:
Juken

Juken

Smash Ace
Joined
Mar 31, 2014
Messages
590
Is PM Dr. Mario missing his belt or something? I'm looking at him ingame and you can see right through his waist and up.
 
Juken

Juken

Smash Ace
Joined
Mar 31, 2014
Messages
590
drogoth232 said:
He never had it.
Guess which version of Doc has it?

Not the PM one
Click to expand...
The Smash 4 or new Smash 3 one?

Edit: Also, is it just me or does the orange on Doc's green recolor look awkward compared to the original yellow? If I can get some more tips on recoloring costumes to keep them looking good, I might make a recolor accurate to PM.
 
Last edited:
ProjectBrawl7

ProjectBrawl7

Smash Ace
Joined
Dec 10, 2014
Messages
834
Juken said:
The Smash 4 or new Smash 3 one?

Edit: Also, is it just me or does the orange on Doc's green recolor look awkward compared to the original yellow? If I can get some more tips on recoloring costumes to keep them looking good, I might make a recolor accurate to PM.
Click to expand...
It looks kinda akward too..
 
Juken

Juken

Smash Ace
Joined
Mar 31, 2014
Messages
590
Isn't the updated Smash 3 Bowser going to have new stock icons anyway?
 
Zarx1554

Zarx1554

Smash Journeyman
Joined
Jun 22, 2014
Messages
402
Location
California
NNID
Zarx1554
Wing Zero said:
it's 4x the texture resolution of regular smash 3c textures
Click to expand...
And it goes over Marvel Vs Capcom (The original on dreamcast version) not brawl and runs in the ue5 which will come out yesterday with Reggie as 3 playable characters, with Shrek and Vegeta as assist trophies. The final boss is now Oogie Boogie from The Nightmare before Christmas, not Tabuu or Onslaught. Sorry for the spoilers
 
Last edited:
ledgerewskie

ledgerewskie

Smash Journeyman
Joined
Sep 14, 2010
Messages
450
Location
California
Cahalan said:
It's finally here:
https://www.mediafire.com/?bwgvexq1jpbzxw4

All these wonderful people now have Rim Light!


Proper Credits are within the folders of said character.
Click to expand...
Thanks for this. I finally got around to adding many of them to the Status List. Did you ever get a chance to try Mario Kart R.O.B.? I believe you were going to attempt it at one point. He has a problem with both his wheels and gyro after every attempt so far.
 
Last edited:
TopazPhoenix

TopazPhoenix

Smash Apprentice
Joined
Dec 30, 2014
Messages
182
Juken said:
I also did the Scourge run trails about a year ago when I had the Scourge mod installed. It's a bit relevant now because somebody is doing a Smash 3 Scourge.
View attachment 65165

I hope that mod gets done.
Click to expand...
Sorry for not posting in a while, right now Scourge is complete, but there are filesize issues due to too many textures. The only thing that needs to be done is for the textures to be remapped onto one image, if you look at the file, you'll see at least three large textures with only a tiny bit being used. As far as I know, Brawlbox can't remap textures, so if someone would like to do that, go ahead. The file is in my last post, I'm on mobile right now.
 
Cahalan

Cahalan

Smash Ace
Joined
Aug 23, 2014
Messages
925
ledgerewskie said:
Thanks for this. I finally got around to adding many of them to the Status List. Did you ever get a chance to try Mario Kart R.O.B.? I believe you were going to attempt it at one point. He has a problem with both his wheels and gyro after every attempt so far.
Click to expand...
I gave up on it, but I did manage to get rid of the wheel problems somehow. It's better to leave it as is because you people were clever on how to "add" the edge texture in places... which reminds me, with the current model, can't you add that edge texture you're currently using for it on the "R.O.B." parts of the model?

Also whens MAHVEL Chrom going to be released?
 
Last edited:
PseudoTypical

PseudoTypical

Smash Lord
Joined
May 5, 2013
Messages
1,326
Location
Pennsylvania
So, to the creators of 3C OoT Link: I've been working through getting access to the Soul Calibur 2 weapons that Link uses, which are probably the best quality, most diverse set of 3D models that are out there for him. I should have them relatively soon. When I get them, would you like them to possibly do an update to Link? I saw that you guys put in the Mirror Shield (also from that game), which is awesome, but it would be great if he had a wider selection than that IMO.

Previews of all of his weapons from the game can be found on this page.
 
Last edited:
soopercool101

soopercool101

Smash Journeyman
Joined
Sep 28, 2013
Messages
389
PseudoTypical said:
So, to the creators of 3C OoT Link: I've been working through getting access to the Soul Calibur 2 weapons that Link uses, which are probably the best quality, most diverse set of 3D models that are out there for him. I should have them relatively soon. When I get them, would you like them to possibly do an update to Link? I saw that you guys put in the Mirror Shield (also from that game), which is awesome, but it would be great if he had a wider selection than that IMO.

Previews of all of his weapons from the game can be found on this page.
Click to expand...
I never realized how much I need bug net link in my life.
 
Last edited:
Layell

Layell

Smash Journeyman
Joined
Feb 3, 2014
Messages
369
Not that I was in any way involved in OoT Link (aside from photos and texture testing), but while those weapons are indeed nice and SC2 Great Fairy Sword holds a speical place in my heart I can't say anybody has time to import the stuff from 3DSmax into brawlbox and all that fun optimization, and texture making stuff.

There are some guides on KCMM for that. Because right now PM alts are the #1 priority for most of us.
 
NFMLH2

NFMLH2

Smash Apprentice
Joined
Sep 30, 2014
Messages
94
ElGoombaswag said:
Are those the icons for the Mewtwo model with fat thighs?
Click to expand...
No, I didn't like that Armored Mewtwo's Stocks were different from Mewtwo's stocks so I decided to create those stock images. If you don't like it you don't have to use them. Up to you.
 
NFMLH2

NFMLH2

Smash Apprentice
Joined
Sep 30, 2014
Messages
94
ElGoombaswag said:
N-n-no I do!! I didn't want you to think I was insulting your work. Sorry.
Click to expand...
I also have to be sorry.. I worded it incorrectly. I meant to say is that if you like it you can use it and if you don't like it I can take the hate. It's okay to insult my work :p
 
SylveonGives

SylveonGives

Smash Journeyman
Joined
Jun 16, 2015
Messages
458
Location
Pennsylvania
Here's something I'm working on: A Second Sonic Expansion (I can't do vertex hacks but if someone would want to make them of these you may, just let me know so I can send you the model/textures)
 
Last edited:
Juken

Juken

Smash Ace
Joined
Mar 31, 2014
Messages
590
You might want to sample the colors from actual sprites or artwork of characters if you can. I know that Mighty is a bit more red than that, and Amy is not that saturated or even that tony of pink. And the Mighty one might benefit from black eyebrows and side-spikes, with just the middle spikes being red, but it's not a must-have thing since the shadow alt didn't get the red spike streaks.

As for Amy, she could possibly be improved by using the yellow Sonic Brawl-based recolor that has the gold rings on his hands already instead of the default model, like what I think was done with the Darkspire Sonic alt. OR (this one's probably a better idea, you could use the Smash 3 Silver alt costume model because his shoes could be reskinned to look like Amy's and his wrist-bands already look like rings (picture related). Or it could be based off classic Amy and have normal gloves and blue shoes.
amy.JPG

Don't know about the others, but the suggestion about sampling the colors would go the same for them.
 
Last edited:
TopazPhoenix

TopazPhoenix

Smash Apprentice
Joined
Dec 30, 2014
Messages
182
Juken said:
-snip
Click to expand...
Yeah, I can help make semi-alts for those characters. Also, you vertex hack by using advanced model editor with vertex view enabled. Also, Scourge won't be finished unless someone remaps the textures, I know he's not top priority, but some people want to use the costume, and I want to have it finished so people can enjoy it.
 
PseudoTypical

PseudoTypical

Smash Lord
Joined
May 5, 2013
Messages
1,326
Location
Pennsylvania
Zarx1554 said:
For the SC2 Link, how will the Biggoron's Sword work?
Click to expand...
I wasn't really planning on using all of the weapons, so that one would likely be unused. If you guys have a preference for what I try to import, let me know. (Also, know that it might not happen considering I've gotta figure out how to do it before life gets crazy again, but I'll try)
 
SylveonGives

SylveonGives

Smash Journeyman
Joined
Jun 16, 2015
Messages
458
Location
Pennsylvania
Juken said:
You might want to sample the colors from actual sprites or artwork of characters if you can. I know that Mighty is a bit more red than that, and Amy is not that saturated or even that tony of pink. And the Mighty one might benefit from black eyebrows and side-spikes, with just the middle spikes being red, but it's not a must-have thing since the shadow alt didn't get the red spike streaks.
Click to expand...
This better?
 
You must log in or register to reply here.
Top Bottom