MCG
Smash Apprentice
- Joined
- Nov 11, 2013
- Messages
- 95
When it is uncalibrated, both the red and the black arrow (raw and direct input) move by the same amount, just like you obtained so that's not the problem.
I really don't have any other suggestions. It is rather strange that the Y direction changes sign between 40 and 128. If the raw value of the Y direction from DXTweak is linear when you move in that direction (e.g. going from 32 to 220) and not jumping around the place, it would seem that the input is correctly read but somehow the controller test rom reads something else.
I've never had that happened to me but if you figure out what's wrong, I'd be interested to know what happened.
I really don't have any other suggestions. It is rather strange that the Y direction changes sign between 40 and 128. If the raw value of the Y direction from DXTweak is linear when you move in that direction (e.g. going from 32 to 220) and not jumping around the place, it would seem that the input is correctly read but somehow the controller test rom reads something else.
I've never had that happened to me but if you figure out what's wrong, I'd be interested to know what happened.