Computer as controller to N64 Adapter Instructions

[Karajan]

You'll need:
Arduino Uno
Arduino Ethernet Shield
Ethernet Cable
N64 controller to sacrifice
Maybe some tape and some electric wire
Maybe some soldering skills
Windows 7 with directX 11(?)

In the zip file you'll find the setup for the windows program that passes the input to the arduino and another zip file with the arduino sketch.
Upload the arduino sketch, connect the computer and arduino via ethernet, reset the arduino, disable your other network adapters on your computer. Cut your N64 wire or take it out, stip the casing to expose the 3 wires on the inside, plug the white wire of the N64 controller into pin #2(?) and the black wire into gnd on the arduino, make sure the red wire isn't touching anything. Run the projectx74 program, setup your buttons and **** and press start.

I'll make this prettyier and **** later

 

[Karajan]

Now I'm going to make another adapter that only works for keyboards and will have no lag