PerryGriffith
Smash Rookie
- Joined
- Nov 6, 2014
- Messages
- 11
Hey Guys,
So I am posting on this forum because my account was banned from the Dolphin-Emu forums. The screenshot of my emulator that I posted to the thread showed Melee in the background. As a result, the support thread was closed and my account is now banned for 20 days. I hope you all are a little more forgiving... please be more forgiving ;..(
Anyways, that's besides the point. As you can tell from the title, not only is the "AR Codes" section of my dolphin emulator completely blank, but I can't get the GCPad Settings of the most recent, "master" version of Dolphin to detect any button inputs from my controller as well. Please note that, on older versions of Dolphin, the button inputs ARE detected, but the AR codes tab is still blank. This means that I cannot enable the "Global Melee Netplay" option or play Melee online
In regard to the AR Codes Tab:
I have used two different Melee ISO files, enabled cheats via game settings, and even installed two different versions of dolphin. However, none of these attempts at fixing my issue have yielded a result yet. The problem is that the AR Codes section is completely blank. It is important to know that this all started happening on the new computer I built a couple months ago.
GCPad Issue:
I have used this adapter in the past on my laptop and with an earlier build of dolphin with no real issues. I remember having some problems with Dolphin recognizing that the device was plugged in (SDL/1/USB GamePad appears in the 'device' drop down menu) but no button presses were detected. I found out that I would have to plug in the controller to the adapter after opening up dolphin and that would get it to work properly. With my new computer, after installing the drivers for the GameCube controller adapter, I calibrated the controller using the driver's calibration tool and proceeded to run the dolphin emulator. After opening up the GCPad configuration menu, I noticed that the controller appeared in the device drop-down menu as expected. However, after selecting the SDL/1/USB GamePad and/or SDL/0/USB GamePad devices, nothing happened. No button presses were/are being registered even after resetting all of the button inputs and trying to input new ones. I have re-installed the drivers for the adapter twice no to no avail.
I can't say I enjoy getting 4-stocked by just about 80% of you, but it has helped me become a much better melee player and I would love to get this thing up and running as soon as possible. In advance, thank you for your time and patience.
Operating System: Windows 7 64-bit
Dolphin Version: 4.0-4085
Screenshots:
Blank AR Codes Tab:
Blank Gecko Codes Tab (not sure if this is relevant):
So I am posting on this forum because my account was banned from the Dolphin-Emu forums. The screenshot of my emulator that I posted to the thread showed Melee in the background. As a result, the support thread was closed and my account is now banned for 20 days. I hope you all are a little more forgiving... please be more forgiving ;..(
Anyways, that's besides the point. As you can tell from the title, not only is the "AR Codes" section of my dolphin emulator completely blank, but I can't get the GCPad Settings of the most recent, "master" version of Dolphin to detect any button inputs from my controller as well. Please note that, on older versions of Dolphin, the button inputs ARE detected, but the AR codes tab is still blank. This means that I cannot enable the "Global Melee Netplay" option or play Melee online
In regard to the AR Codes Tab:
I have used two different Melee ISO files, enabled cheats via game settings, and even installed two different versions of dolphin. However, none of these attempts at fixing my issue have yielded a result yet. The problem is that the AR Codes section is completely blank. It is important to know that this all started happening on the new computer I built a couple months ago.
GCPad Issue:
I have used this adapter in the past on my laptop and with an earlier build of dolphin with no real issues. I remember having some problems with Dolphin recognizing that the device was plugged in (SDL/1/USB GamePad appears in the 'device' drop down menu) but no button presses were detected. I found out that I would have to plug in the controller to the adapter after opening up dolphin and that would get it to work properly. With my new computer, after installing the drivers for the GameCube controller adapter, I calibrated the controller using the driver's calibration tool and proceeded to run the dolphin emulator. After opening up the GCPad configuration menu, I noticed that the controller appeared in the device drop-down menu as expected. However, after selecting the SDL/1/USB GamePad and/or SDL/0/USB GamePad devices, nothing happened. No button presses were/are being registered even after resetting all of the button inputs and trying to input new ones. I have re-installed the drivers for the adapter twice no to no avail.
I can't say I enjoy getting 4-stocked by just about 80% of you, but it has helped me become a much better melee player and I would love to get this thing up and running as soon as possible. In advance, thank you for your time and patience.
Operating System: Windows 7 64-bit
Dolphin Version: 4.0-4085
Screenshots:
Blank AR Codes Tab:
Blank Gecko Codes Tab (not sure if this is relevant):