There are many people who are been trying to get their Gamecube controller Padpyght display to work but can't configure their controls right cause they have a Wii U adapter or who are wanting to display their controllers. I'll try my best to explain what to do to make it work properly.
If you haven't already download the requirements here are the links:
Python: https://www.python.org/downloads/release/python-279/
Padpyght: https://github.com/lifning/padpyght
Pygame: http://pygame.org/ftp/pygame-1.9.1.win32-py2.7.msi
PadGameUtilities: https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/pgu/pgu-0.18.zip
Controls: https://www.dropbox.com/s/88ykksp7bmy1wk6/gamecube.json?dl=0
(For those who are just trying to fix the controls skip to step 3)
---------
Instructions:
1. Install Python and pygame
2. In the padpyght folder place the PGU folder in there and hold **** left click it then click open command window here then type in setup.py install (close after done)
3. go to your startup search bar and type in "%appdata%" and from there go to
"padpyght\mappings" in here place the gamecube.json file in there. ( this is the bindings for the gamecube)
4. In your padpyght folder just open up start.py and depending on what port your controller is just select that and gamecube and hit run.
---------
Done. If you have any trouble then I'll try to help you but otherwise you have it up and running fine.
Video of the GC Display https://www.youtube.com/watch?v=D7ZWAQzcuPY
If you haven't already download the requirements here are the links:
Python: https://www.python.org/downloads/release/python-279/
Padpyght: https://github.com/lifning/padpyght
Pygame: http://pygame.org/ftp/pygame-1.9.1.win32-py2.7.msi
PadGameUtilities: https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/pgu/pgu-0.18.zip
Controls: https://www.dropbox.com/s/88ykksp7bmy1wk6/gamecube.json?dl=0
(For those who are just trying to fix the controls skip to step 3)
---------
Instructions:
1. Install Python and pygame
2. In the padpyght folder place the PGU folder in there and hold **** left click it then click open command window here then type in setup.py install (close after done)
3. go to your startup search bar and type in "%appdata%" and from there go to
"padpyght\mappings" in here place the gamecube.json file in there. ( this is the bindings for the gamecube)
4. In your padpyght folder just open up start.py and depending on what port your controller is just select that and gamecube and hit run.
---------
Done. If you have any trouble then I'll try to help you but otherwise you have it up and running fine.
Video of the GC Display https://www.youtube.com/watch?v=D7ZWAQzcuPY
- Applicable Games
- Melee, Brawl, Project M, Smash Wii U