I want to add these stages, but can't figure out how for the life of me.

[maian]

http://kc-mm.com/?p=4160

Those caught my attention today, specifically Sector Z, Venom, Mario Bros, and Fourside. I have the latest version of Brawl+, so I think I have all the things I need, but how on earth would I add them?

Also, I've removed the "Disable custom stages" code, would that conflict with trying to add these?

 

[TheOriginalSmasher]

Put the one you want in any stage, and just rename the stage file. for example, let's say you are going to put Fourside in over Final Destination. Rename the Fourside file to: FitFinal And then put that into the Final Destination folder.

 

[maian]

Okay. So, would that replace Final Destination, or create a new spot for it in the Melee page? Because I don't necessarily want these if they're replacing levels.

 

[TheOriginalSmasher]

You can make new spots in melee screens, but I don't know how

But why not put the stages over stages like, Hanenbow, or 75m. That's what I did.

 

[Mr.Chuy]

Add these codes to your gct file:

Stage Roster Expansion System: v1.1
E0000000 80008000
04043B20 3800003A
04043B40 1C060018
04043B58 38840018
04949C8C 3884B460
04949D10 3884B460
04949E20 3884B460
04949EFC 3884B460
C294A588 00000003
A063001A 2C030040
41800008 38600000
60000000 00000000
C294A1D0 00000003
7C7D1B78 2C03FFFF
40820008 3FA0003F
60000000 00000000
04015564 48000010
2042AEB0 00000041
0442AEB0 00000000
80000000 8042AEB0
80000001 8042AEB0
60000030 00000000
8A001801 00000000
86000000 00000024
86000001 00000018
62000000 00000000
0042B34C 024B0000
80000000 8042B348
80000001 00000040
80000002 00000031
60000008 00000000
4A001000 00000000
94210001 00000000
16000004 00000010
73745F63 7573746F
6D002E72 656C0000
94010002 0000000D
86000000 00000018
86000001 00000001
86000002 00000001
62000000 00000000
80000000 8042BC18
80000001 8042B460
8A010001 00000000
0042BC18 010F0000
80000000 8042BC14
80000001 8042B560
80000002 00000031
60000008 00000000
4A001001 00000000
94210000 00000000
4A001000 00000000
16000000 00000008
43757374 6F6D3100
94010002 00000006
86000000 0000000C
86000001 00000004
86000002 00000001
62000000 00000000
E0000000 80008000

Enable Random Expansion Stages v1.1
C26B7A6C 00000005
3860001F 2C120000
41820008 3860000A
7C101800 41800008
38000001 7C800379
60000000 00000000

Custom SSS
046B8F5C 7C802378
046B8F64 7C6300AE
040AF618 5460083C
040AF68C 38840002
040AF6AC 5463083C
040AF6C0 88030001
040AF6E8 3860FFFF
040AF59C 3860000C
060B91C8 00000018
BFA10014 7CDF3378
7CBE2B78 7C7D1B78
2D05FFFF 418A0014
006B929C 00000020
066B99D8 00000020
00010203 04050709
080A0B0C 0D0E0F10
11141516 1A191217
2A18131D 1E1B1C06
006B92A4 00000013
066B9A58 00000013
1f202122 25242326
27282b2c 2d2e2f30
31323300 00000000
06407AAC 00000068
01010202 03030404
05050606 37640808
0909330A 0B0B0C0C
0D0D0E0E 130F1410
15111612 17131814
19151C16 1D171E18
1F19201A 211B221C
231D241E 251F2932
2A332B34 2C352D36
2F373038 3139323A
2E3BFFFF 07074001
4102421a 43014402
451a4601 4702481a

Then try downloading the pack again

 

[maian]

Those are all in my pack, except for Enable Random Stage Expansion. I'll add that one. But, where do I put the downloaded stages once I have them? That's really the question here.

...And I just realized "Enable Random Stage Expansion" is probably a code that auto updates the stage select screen when new stages are added. If that's true, that's freaking brilliant.

 

[Mr.Chuy]

where ever you normally put stages

 

[maian]

where ever you normally put stages

...doesn't help me. =(

I've only dealt with character textures...

 

[Mr.Chuy]

pf->stages->melee

 

[NO@H]

I think the latest build of brawl+ already uses all the slots for stage expansion...
you can always add more custom stages, but I disrecall how

 

[maian]

The problem is, I can't find any guides that are n00b friendly. =/ They say to place the stages over "STGCUSTOM#" levels that are "Final Destination based," and yet, the replacement levels in my codeset are over 75M and Hyrule. Whaa? I was able to put Fourside and Mario Bros in over those two levels, but it seems like there's no other levels for me to replace. And yes, I DID add the "Enable Random Expansion" code, but it seems like it didn't do anything. I also tried renaming one of the levels (Sector Z) into "STGJUNGLE" to replace Rumble Falls' custom level, but that just freezes my game.

AAH.

 

[Mr.Chuy]

*sigh* you're makng this more difficult than t really is
You can only replace a stage with one ONLY if it's meant to be over that stage
For example i have a couple of stages that are meant to be played on FD however with a rel you can change which stage it'll work over
For instance Sector Z will not work over Rumble Falls unless you use a rel otherwise you'll get a crash

If you're still confused i'll explain better

 

[hotdogturtle]

That package was made for easier use of the stage expansion code. Use the code, and put those stages on the 9 STGCUSTOM spots. The rest of your codeset shouldn't matter. And don't worry about the stages being "FD based", that's only important if you're making your own stage or moving them to other stages, which you're not. Just use them exactly as he gave them to you.

 

[maian]

*sigh* you're makng this more difficult than t really is
You can only replace a stage with one ONLY if it's meant to be over that stage
For example i have a couple of stages that are meant to be played on FD however with a rel you can change which stage it'll work over
For instance Sector Z will not work over Rumble Falls unless you use a rel otherwise you'll get a crash

If you're still confused i'll explain better

Well, I figured stages could only go over stages they're meant to go over. It was worth a try, but the game freeze was more or less expected. Maybe I'll try editing a REL though.

That package was made for easier use of the stage expansion code. Use the code, and put those stages on the 9 STGCUSTOM spots. The rest of your codeset shouldn't matter. And don't worry about the stages being "FD based", that's only important if you're making your own stage or moving them to other stages, which you're not. Just use them exactly as he gave them to you.

I guess the problem, then, is that the codes just aren't working. The only "STGCUSTOM" levels in my folder are the ones already included in Brawl+'s latest build. I'll open up my GCT and try again, because I figure it shouldn't be this hard.