Custom GameCube Controllers

[Adoni23]

Only selling it w/mods or a paint job.

I Just wanted a base price on the controller so I could pick which affordable mods I could buy with it

 

[GCS Gaming Customs]

I Just wanted a base price on the controller so I could pick which affordable mods I could buy with it

Just pick the custom controller option on my site, when I have stock again.

 

[GCS Gaming Customs]

I Just wanted a base price on the controller so I could pick which affordable mods I could buy with it

Just pick the custom controller option on my site, when I have stock again.

 

[Adoni23]

Just pick the custom controller option on my site, when I have stock again.

Any idea when that'll be?

 

[GCS Gaming Customs]

Not really, because I need to complete these LED orders, so I gotta figure out how Im going to do that now..

 

[SirroMinus1]

The wires are attached to the board inside of the controller, these are very easy to switch.

Do you have like a YouTube link. I'm too good at breaking stuff

 

[TerryJ]

Do you have like a YouTube link. I'm too good at breaking stuff

I don't have a video that I can link you to but instead I can direct you to Kadano's Technical Knowledge thread which has pictures detailing how to take apart a controller. All you have to do is take out the motherboard for the controller and swap it with a different one then put the shell back on.

 

[GCS Gaming Customs]

Pretty straightforward and hard to mess up.

 

[Coastward]

ok so i got lazy and instead of painting a controller, i just took two controllers, changed the shells so they both have two different colours, and took both controls and put it on one. if anyone cares to see it i can take pictures of it.

 

[Firejew]

Ohhh SNAP these are rad!

Next time you get stock in, do you think I could order 4 custom painted GC controllers?
I understand that a little over 2 weeks ago you said you'd stop taking orders on painted stuff, but these are absolutely LEGIT, and I'd love to have a set of 4 for my house, which is (very) slowly turning into my area's Strikers and Melee tournament zone.

 

[GCS Gaming Customs]

ok so i got lazy and instead of painting a controller, i just took two controllers, changed the shells so they both have two different colours, and took both controls and put it on one. if anyone cares to see it i can take pictures of it.

Sure, if you feel like showing the people.

Ohhh SNAP these are rad!

Next time you get stock in, do you think I could order 4 custom painted GC controllers?
I understand that a little over 2 weeks ago you said you'd stop taking orders on painted stuff, but these are absolutely LEGIT, and I'd love to have a set of 4 for my house, which is (very) slowly turning into my area's Strikers and Melee tournament zone.

Again, first come first served. I will let you all know when orders are back up, and Ill let you guys order until I can't take anymore. I can't really take an order of 4 controllers at one time tho at the time being, but maybe I could work on it over time.

On a side note,
Anyone have some suggestions for selling wii ccps? I got a lot of them (I need to buy them for nunchuk sticks) and haven't had much luck selling them. Obviously, they are not in the same demand of GC controllers, but are there any brawl/PM players who would like to suggest some new mods or other things that would motivate you to buy some wii ccps?

 

[Adoni23]

Alright, I've got one more request, I'm trying to go as cheap as possible while still making it cool
(I'll be sending in a controller if I decide to go with this)

Alright, the Blue (I guess its called emerald, idk) Shell, the one from this pic http://s1321.photobucket.com/user/G...3-456b-aa44-2cad60cd2f62_zps87a0e163.jpg.html nd a white shell on back. The sooner you can give me a price, the better so i can put the money aside.

 

[Criaric]

I'm curious on what you could do with a Link design, if you decide on doing it I am interested for sure if it looks cool as I like the C.Falcon one you made.

 

[GCS Gaming Customs]

lright, I've got one more request, I'm trying to go as cheap as possible while still making it cool
(I'll be sending in a controller if I decide to go with this)

Alright, the Blue (I guess its called emerald, idk) Shell, the one from this pic http://s1321.photobucket.com/user/G...3-456b-aa44-2cad60cd2f62_zps87a0e163.jpg.html nd a white shell on back. The sooner you can give me a price, the better so i can put the money aside.

I'm curious on what you could do with a Link design, if you decide on doing it I am interested for sure if it looks cool as I like the C.Falcon one you made.

Don't have emerald in stock. I could do a silhouette of link.


I was going to wait until tomorrow for this, but I'll give you all a heads up right now.

I have restocked 5 controllers on my site (all of these controllers can be found on the front page) with one stock each. This means that I will be now accepting orders again (just send an email to make sure I have what you want in stock). However, since I am trying to figure out my LED situation, I need some time on those orders and will not accept any LED orders atm.

Grab a controller while you can! I have had a ton of requests for custom controllers over the past few months, so make sure you place your order before someone else takes it!

 

[Berble]

I guess you could call these "custom" even though all I did was change some plates. Hope to paint these soon though.

Also something interesting I noticed when taking these apart was that my indigo controller ad a small metal bar holding the L trigger in while my white controller was just the spring. Maybe that's why the triggers feel different?
http://i.imgur.com/5qezQX8.jpg
http://i.imgur.com/tWuwurJ.jpg

 

[GCS Gaming Customs]

I will get to painting a lot of your guy's controllers in a few days. There's snow all over the place here in NC.

Im working on getting LEDs and figuring them out for you guys.

 

[F. Blue]

Can you make a Gamecube controller like this? If so how much for that and the fan mod?

 

[GCS Gaming Customs]

Can you make a Gamecube controller like this? If so how much for that and the fan mod?

Can't do fan mod right now. What design are you talking about?

 

[F. Blue]

Whoops, thought I posted the link. Can you make a chrome controller like this?
http://zoki64.deviantart.com/art/Finger-print-magnet64-398271515

 

[soap-soap]

How much for two analog sticks and a set of A,B,X,Y buttons?

 

[GCS Gaming Customs]

Whoops, thought I posted the link. Can you make a chrome controller like this?
http://zoki64.deviantart.com/art/Finger-print-magnet64-398271515

No, Zoki uses really nice and really expensive automotive paint (you can even paint buttons with it :o ). If you want to get a controller like that, you have to get it from him, and that'll cost you..

How much for two analog sticks and a set of A,B,X,Y buttons?

PMed.

 

[GCS Gaming Customs]

Just realized that this is the 501st post.. damn missed the happy 500 lol

Anyways, I got the LEDs working (I'm so happy like really lol I'm terrible with this stuff) and I will be working on everyone who has already ordered LEDs. I look forward to making some sick **** with these things!

 

[B.W.]

I'd like to see these LEDs

 

[GCS Gaming Customs]

I'd like to see these LEDs

They didn't come out all that bright, since I did not use the brightest LEDs.. O well, I guess Ill sell these ones a bit cheaper and it will allow me to learn more about it.

They were only 1200 mcd, which I didn't realize was too low.. (but the viewing angle is still 120 which is very good but doesn't quite make up for 1200 mcd)

 

[Hahaae]

^Speaking of Zoki, I know that guy! He's ranked #4 in the world at Mario Kart 64.

That aside, these are really cool. Will look into investing in one once I save up enough money (probably sometime after SB4/MK8 are released).

 

[Sal]

Will you get some more stocks anytime soon?

 

[GCS Gaming Customs]

I restocked the custom controller, if that is what you are talking about.

 

[ofmars]

For future reference when available how much would it cost for a clear controller with purple led ?

 

[GCS Gaming Customs]

I don't have purple LEDs right now, so I cannot give you an exact price. If you just want an indigo top with a clear bottom and LEDs, probably around $60

 

[ofmars]

Would it be same price for black top instead with clear bottom and LEDs ?

 

[GCS Gaming Customs]

Yea, also depends on the LED configuration.

 

[pokemongeof]

Sorry GCscrubb. Haven't seen my dad in a while.

Will get my payment 2 u asap

 

[AireX]

How much would just buying shells from you be? I'm looking for a Clear Bottom Shell with a Emerald Top and maybe Bl. Do your top Shells have the Nintendo Gamecube logo on them? Or are they third party? What are the Prices of the items by themselves?

 

[GCS Gaming Customs]

$15 Clear bottom
$25 Emerald top (out of stock)
$5 Black top
Nothing is third party, all have the logo. I can also shell painted shells or shells with the rounded analog or shells with decals. PM for a quote price on exactly what you want.

 

[B.W.]

Yo, @ GCS Gaming Customs

Would you know where I could purchase Wii U Pro control sticks? They're shorter than the Classic Controller Pro sticks, and I prefer the grips on them to the grips on the GCC controller.

On top of that, around how much would a Green painted Top + Orange painted bottom + a BW decal, in the same orange as the back, on the face go for, with rounded analog on both stick.

 

[GCS Gaming Customs]

I don't have em right now. I might start selling these once I can do something with the wiiu controllers, so once Smash 4 comes out.

Check your PM

 

[Squigie]

How much would a orange top red bottom with red joystick controller end up costing?

 

[artofskjet]

a marth gc shell would be god-like

 

[bonbon5353]

How much would this cost including shipping to Winnipeg

Controller Type: Classic
Color(s): Silver
Colored Button(s): none
Stencils/Designs: Pits logo from brawl

Custom Stick(s): none
Removed Rumble Pack: No

 

[pseudomac]

How much would it cost for this?

-Painted shell (green handles, purple everything else?)
-Also if its possible, small symbol on the front?

I want to get an Eva Unit 01 theme controller essentially.